Korea Pressure System Technology

HOME > Product >

C Type


High - speed position - controlled C - type hydraulic press

  • The workability of the body frame is excellent as it is a C - type which allows us to select the workspace from three sides .
  • The frequency of the descent location is maintained at 0.01 mm even between pressurized sections .( The holding position funtion is optional ) We can customize this product according to the customer s order specification while this machine can be widely applied in not only the standard type , but also automatic turning press equipped with turn table device straightening press with bending - measuring device bush - type press use . disassembly and reassembly use au 切 parts , shaping use of fuel cell , etc
  • Equipped with load cell , and linear scale and monitor , this machine can control load and location . Die rerrkote monitoring system makes status check of the equipment and A / S support east .
  • You can control various setting including pressure , location , temperature , speed , etc . on the monitor .

Option equipment for the inprovement in the productivity and maintainalalty(additional order items)

Automatic clamping device Self holding circuit
Die lifter device Front and back safety shutter
Die change device Side safety cover
Slide positioning display Automatic upper locking device
Visual motion display Two handed starting safety device
Moving bolster Alarm patrol light
Heatirvg plate for heat molding Safety light curtain
Temperature recorder Hydraulic devices for piercing the side
Hydraulic tank temperature display Heater power circuit
Fluid automatic cooling system Remote monitoring system


NCP-20 NCP-30 NCP-50 NCP-75 NCP-100 NCP-150
Pressing Capacity TON 20 30 50 75 100 150
Bolster Area mm 620x500 620x500 720x550 750x600 1000x800 1000x800
Stroke mm 350 375 400 450 450 450
Open Height mm 475 500 550 650 650 650
Descending Speed mm/s 200 200 200 200 200 200
Ascending Speed mm/s 200 200 200 200 200 200
Pressing Speed mm/s 23 23 23 23 23 23